Likewise, the Uwell Caliburn KOKO case framework is perfect with its namesake, the 2mL refillable Caliburn Pods, including a double parallel 1.4ohm curl structure that disintegrates e-Juice or nicotine salts effortlessly, conveyance scrumptious flavours and nicotine when required. Moreover, the Caliburn KOKO case pack’s shape and style are very different, offering a progressively concealable shape and structure for better transportability.

Uwell Caliburn Koko Pod System

Exhibiting the UWELL Caliburn KOKO Pod System, a finely created vaping case framework made with an incorporated 520mAh battery-powered battery. UWELL Caliburn KOKO is reasonably swayed safe, securely lodging the 520mAh battery-powered battery and donning an outside matte metallic completion. 

UWELL Caliburn KOKO Pod System Features:

• Dimensions –
• Integrated 520mAh Rechargeable Battery
• Wattage Output Range: 11W
• Voltage Output Range: 3.2-4.0V
• Direct Voltage-Based Output
• Resistance Range: 1.2-1.5ohm
• Aluminium-Alloy Chassis Construction
• 2mL Capacity Juice Pods
• 1.4ohm Pod Coil Resistance
• Pro-FOCS Flavor Technology
• Top Fill System – Drip Tip Doubles as Fill Port Cover
• 3.5mm Fill Port – Dual Ports
• Minimum Fill Line on Pod
• Proprietary Gold-Plated Magnetic Snap-In Connection
• Draw-Activated Mechanism Fault Diagnosis
• Short-Circuit Protection
• Low Power Alert
• 10 Second Cut Off Protection
• MicroUSB Port
• Available in Black, Grey, Blue, Red, Light Green, Dark Green, Orange, Gold, Purple, Pink

Caliburn Koko Vape Review

The Uwell Caliburn Koko vape is a pared-down version of the Caliburn pod mod system. The device is square-shaped and has a tiny, lightweight frame. The build features aluminium alloy and plastic with no buttons on the pod mod.

The Koko vape uses a 2ml juice pod plugs into the top section and is draw-activated. The internal battery has a 520mAh capacity and uses USB charging with a port on the unit’s base. A small pinhole LED indicator light is on the side to show battery life. The pods use a 1.2ohm, round-wire coil, which offers a loose, mouth-to-lung draw.

Kit Contents

The Uwell Caliburn Koko starter kit comes in an elegant, pull-out cardboard box. The device sits on the top section, with the other kit parts underneath. The Koko is on full display with a pod already installed.

Here is everything else that comes in the Caliburn Koko kit:

• 1 UWELL Caliburn KOKO mod
• One 1.2ohm Caliburn Pod
• One 1.4ohm Caliburn Pod
• 1 MicroUSB Cable
• 1 User Manual
• 1 Warranty Card

How Long the Battery Lasts

The Koko has an internal 520mAh battery, the same capacity as the first Caliburn cell. The Koko can output a maximum of 11W, while the voltage ranges from 3.2 – 4.0V.

The battery duration depends on how often and how long a user vapes, but a fully charged cell can last for about ten hours of moderate use or around five hours with constant, heavy use.

The Bein chip inside the unit (yes, there is a chip inside the Koko) offers a ten-second cut-off time and short-circuit protection.

The Caliburn Koko Pods

The Koko pods can hold 2ml of nicotine salt e juice inside their plastic frames. The pods are top-fill, so users must remove the black plastic mouthpiece to access the two fill holes (one on either side of the coil). The Koko kit comes with two pods:

• one rated for 1.2ohms (red base) and came pre-installed
• the other is rated at 1.4ohms (black base).

The pods have gold-plated contacts on the base and two magnets to secure a connection with the battery section. The drip tip comes off, which is how users fill the pods with e juice. There is a barely visible fill-line marker outside the pod to help guide users, although it is hard to see.

The fill line, however, makes little difference. Users can fill the pod without it disrupting the performance or vapour quality. The coils inside the pods are not replaceable and cannot be exchanged.

How to Turn On the Caliburn Koko

The Caliburn Koko vape features a simple, buttonless design. Unlike the other model of Caliburn, which had a power button to switch between manual and automatic modes, the Koko opts for an air-activated battery with no on/off switch. The pods are draw-activated, so users need only take a hit to create vapour.

After charging the battery, users must remove the plastic drip tip to reveal the two fill holes, measuring about 3.5mm (0.13″) each.